UPR Plug N Play™ Dual Oil Catch Can Kit w/ Clean Side (Black) - 2022-2024 Ford Maverick 2.0 EcoBoost

Overview

The UPR Plug N Play™ Oil Catch Can with Clean Side Catch Can (Black) is the ultimate dual-protection PCV system upgrade for the 2022–2024 Ford Maverick 2.0 EcoBoost. Engineered and manufactured in the USA by the largest aftermarket catch can manufacturer in the country, this complete bolt-on kit intercepts harmful oil mist and crankcase vapors on both the dirty (PCV) side and the clean (CCV) side — providing full-spectrum engine protection that no single-can system can match. Whether you're daily driving, hauling, or pushing your Maverick hard, this is the best oil catch can for the 2022–2024 Ford Maverick 2.0 EcoBoost.

Key Features & Benefits

• Patented Multi-Chamber Diffuser Technology — UPR's exclusive 4-stage internal design coalesces and condenses oil vapor far more effectively than generic honeycomb or air-compressor-style filters, ensuring maximum separation before air returns to your intake.
• Exclusive Plug N Play™ Push-Button Quick-Release Fittings — UPR's patented push-button connectors let you press, pull, drain, and snap the can back in place in seconds — no tools, no removed engine covers, no disconnected hoses required.
• Dual-Side Protection (PCV + CCV) — The included Clean Side Catch Can (CSCC) covers the driver-side crankcase vent, trapping oil mist that gets forced out under boost, hard acceleration, towing, or hill climbing, while still allowing the CCV system to function normally.
• OEM 5/8" Factory-Style Connectors — Uses OEM-spec 5/8" factory fittings that mate directly to your Maverick's factory PCV lines — no cutting, splicing, or universal clamps needed.
• Continental Braided Hose with Billet Hose End Covers — Oil-resistant Continental braided hose replaces flimsy factory rubber lines for a stronger, longer-lasting, and better-looking installation.
• CNC-Machined Billet Aluminum Construction — Machined from domestic T-6 6061 aluminum bar stock and finished with diamond-cut tooling in a premium black anodized finish that looks as good as it performs.
• 100% Modular & Fully Serviceable — This kit can be fully disassembled, emptied, and cleaned in seconds — no specialty tools needed.
• Reversible / Returnable to Stock — The Plug N Play design means you can remove the entire kit and return your Maverick to factory configuration quickly and easily.
• Improves Fuel Economy, Throttle Response & Performance — Cleaner intake air translates to more efficient combustion, reduced carbon buildup on intake valves, and better overall drivability.
• Made in the USA with Unconditional Warranty — Every UPR catch can is designed, tested, and built in the USA, backed by UPR's unconditional product warranty.

What's Included

• 1x UPR Single Valve Billet Catch Can — PCV (Dirty) Side (Black Anodized)
• 1x UPR Clean Side Catch Can (CSCC) — CCV (Clean) Side (Black Anodized)
• OEM-Style 5/8" Factory Push-Button Connectors (set)
• 5/8" Oil-Resistant Continental Braided Hose (pre-cut lengths)
• Billet Aluminum Hose End Covers
• Billet Adjustable Mounting Bracket
• All required hardware for installation
• UPR printed installation instructions (downloadable PDF also available)

Specifications

Brand	UPR Products
Part Number	5049-288-1-CSCC-K
Finish	Black Anodized
Main Catch Can Dimensions	2.25" x 4.5"
Main Catch Can Capacity	4 oz.
Clean Side Catch Can Dimensions	2.25" x 3.5"
Material	Domestic T-6 6061 Billet Aluminum
Hose Type	5/8" Oil-Resistant Continental Braided
Connector Type	OEM-Style 5/8" Factory Push-Button (Plug N Play™)
System Coverage	Dual — PCV Side + CCV (Clean) Side
Manufacture Location	USA
CARB Compliance	Not CARB Compliant — Racing / Off-Road Use Only. NOT FOR SALE OR USE IN CALIFORNIA.
Warranty	Unconditional (UPR Products)
Estimated Install Time	10–20 minutes

Fitment & Compatibility

This kit is a direct-fit, vehicle-specific application for the following:

• 2022 Ford Maverick — 2.0L EcoBoost I4 (Turbocharged)
• 2023 Ford Maverick — 2.0L EcoBoost I4 (Turbocharged)
• 2024 Ford Maverick — 2.0L EcoBoost I4 (Turbocharged)

Note: This kit is designed exclusively for the 2.0L EcoBoost (turbocharged) engine. It is NOT compatible with the Ford Maverick 2.5L Hybrid (PHEV) powertrain. Compatible with aftermarket cold air intake systems (confirmed fitment alongside S&B and similar intake upgrades). UPR Products is not affiliated with Ford Motor Company.

Is this kit compatible with a tuned Maverick? Yes. The UPR dual catch can system is ideal for tuned and/or modified EcoBoost applications where increased boost pressure raises the risk of oil mist being pushed into the intake tract.

Is this CARB compliant? No. This part does not carry a CARB EO number and is sold for racing and off-road use only. It is not legal for sale or use on public roads in California.

Installation

This is a true bolt-on, no-cut installation. The UPR Plug N Play™ system uses OEM-style 5/8" factory push-button connectors that attach directly to your Maverick's existing PCV and CCV lines without any modification. A basic socket set is all that's required. Most owners report a complete installation time of 10–20 minutes. No professional installation is required, though a shop install is always an option. Instructions are included in the box and available as a downloadable PDF from UPR Products' website.